APC UPS 10KVA SRV10KVA

• Max. Capacity Used 100%
• Output power capacity 10.0kWatts / 10.0kVA
• Nominal Output Voltage 230V
• Nominal Input Voltage 230V
• Input Connections Hard wire 3-wire (1P + N + E)

APC Easy UPS On-Line SRV 10000VA 230V

High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions.

Automatic internal bypass Pure static bypass switch without bridging contactor securing a fast and reliable transfer to and from bypass, rated for 125% nominal load.

Automatic restart of loads after UPS shutdown

Automatically starts up the connected equipment upon the return of utility power.

ECO Mode Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection

EPO Attach the device to an Emergency Power Off (EPO) system so that power can be turned off in an emergency situation.

Input power factor correction Minimizes installation costs by enabling the use of smaller generators and cabling.

Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging.

Intelligent Card Slot Customize UPS capabilities with management cards.

LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms.

Serial connectivity Provides management of the UPS via a serial port.

USB connectivity Provides management of the UPS via a USB port (not available on all models).

Easy UPS On-Line Features & Benefits

Availability

Intelligent battery management

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Serviceability

Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Audible alarms

Provides notification of changing utility power and UPS power conditions

Predictive failure notification.

Provides early-warning fault analysis ensuring proactive component replacement.

Disconnected battery notification

Warns when a battery is not available to provide backup power.

Output

Max Configurable Power (Watts) 10.0kWatts / 10.0kVA

Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage

Efficiency at Full Load 94.0 %

Output Voltage Distortion 1 %

Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz Sync to mains

Other Output Voltages 220 V, 240 V

Load Crest Factor 3 : 1

Topology Double conversion online

Waveform type Sine wave

Bypass Internal bypass (automatic and manual)

Input

Input frequency 40 – 70 Hz Auto sensing

Input voltage range for main operations 110 – 300 Half load, 176 – 300 Full loadV

Efficiency at Full Load 94.0 %

Other Input Voltages 220 V, 240 V

Batteries & Runtime

Battery type Lead-acid battery

Typical recharge time 5hour(s)

Nominal Battery Voltage 192 V

Expected Battery Life (years) 3 – 5

Battery Charge Power (Watts) 235 Watts

Runtime View Runtime Graph

Efficiency View Efficiency Graph

Communications & Management

Interface Port(s) DB-9 RS-232, Intelligent Smart Slot, USB

Control panel Multifunction LCD status and control console

Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Emergency Power Off (EPO) Yes

Available SmartSlot™ Interface Quantity 1